Type the job the way you’d say it at the machine. The NSIT AI Tool Finder reads it, searches all 292 NSHP end mills we stock, and hands back ranked picks with starting speeds, feeds and pricing.
Three steps. No account, no part numbers.
Half inch 5-flute, roughing 4140 pre-hard on a Haas, flood coolant.
No part numbers, no dropdowns.
The AI pulls out diameter, flute count, material and operation, then scores every one of the 292 NSHP end mills we stock against them.
Each pick shows a match rating, why it fits, starting RPM and IPM, max depth of cut and price. Request a quote in one click, or send it to the calculator.
Choose Calc Speeds & Feeds on any pick and the calculator fills itself in, or enter an NSHP part number directly. Built on NSHP application data for 11 materials, with your machine’s RPM and feed limits applied.
Generic AI will happily invent a part number. This one only answers from tools we hold, with numbers from our own application data, and a specialist behind it.
Every answer is an NSHP end mill on our shelf in Ipswich, MA. Not a guess from the internet, and not a part you’ll wait weeks for.
RPM, IPM and depth of cut come from NSHP application data, not a generic chart.
Quote requests go straight to our application specialists. If a pick isn’t right for your setup, we’ll say so and help you prove out the right one.
No account and no email wall. Use it at the machine on your phone as often as you like.
For tooling outside the NSHP line, use the manufacturer’s selector, then quote the result with us.
Tungaloy NTK’s AI tool-selection assistant. Describe the operation and it returns the Tungaloy NTK designation to quote with NSIT.
Open GabbyNOGA MT’s AI assistant for the UFIBER deburring line. Describe the material, feature and burr and it recommends brush, grit and speed. We supply it and dial it in.
Open the UFIBER guideNSHP solid carbide end mills, NSIT's own private-label line. It searches 292 stocked SKUs from 1/8" to 1" diameter, 3 to 8 flutes, in square end, ball nose and corner radius profiles.
Say it the way you would at the machine: material, operation and diameter, plus flute count if you know it. Machine and coolant help. For example: "3/8 4-flute finishing 316 stainless, flood coolant." No part numbers or dropdowns needed.
They are starting points from NSHP application data. Verify them in the cut, and enter your machine's RPM and feed limits in the Speed & Feed Calculator. For a critical job, call 978-356-2500 and an NSIT application specialist will set it up with you.
Nothing. The AI Tool Finder, Speed & Feed Calculator and Ball Nose Adjuster are free to use, with no account or login.
The AI Tool Finder covers NSHP end mills. For Tungaloy NTK tooling, use Gabby, Tungaloy NTK's AI selector, and quote the result with NSIT. For anything else, send the job to NSIT through the contact form or call 978-356-2500.
Yes. Every pick has a Request Quote button that goes straight to NSIT's team in Ipswich, Massachusetts, and every recommended tool is a stocked NSHP SKU.
Fighting stockouts, chasing cycle time, tired of a 1-800 catalog, or sizing up new machine capacity? Start a conversation with the independent team that handles all of it.
We'll be in touch within one business day.
Call us directly: 978·356·2500